How to use it
- Check the grid and the block count in the tool.
- Open the row by row guide and start at the top row.
- Place each row as written: skip the gap, then place the run. Only the top 8 rows are listed, the rest is a mirror image.
- Download the PNG if you want to keep it open next to the game.
The 16 block circle in numbers
Sixteen is exactly one chunk wide. A circle of this size fits inside a single chunk, which helps if you plan redstone, farms or anything that depends on chunk borders.
The outline of a circle 16 blocks wide is made of 44 blocks. That is 21 per cent of the 208 blocks in the full disc, so a ring is far cheaper than a floor. The ideal area of a circle with this diameter is about 201 square blocks, and the filled version differs from that by 3.5 per cent. The circumference of the ideal circle is about 50.3, for comparison.
| Style | Blocks | Stacks of 64 |
|---|---|---|
| Thin outline | 44 | 44 |
| Thick outline | 60 | 60 |
| Filled disc | 208 | 3 stacks + 16 |
Row by row guide for the top half
Start at the top row. Each line says how many empty blocks to leave from the left edge and how many to place. When a line has two runs, leave the gap between them empty. Rows below the middle repeat the same lines in reverse order.
- skip 5, place 6
- skip 3, place 2, skip 6, place 2
- skip 2, place 1, skip 10, place 1
- skip 1, place 1, skip 12, place 1
- skip 1, place 1, skip 12, place 1
- place 1, skip 14, place 1
- place 1, skip 14, place 1
- place 1, skip 14, place 1
The filled disc has rows of these widths from the top: 6, 10, 12, 14, 14, 16, 16, 16. Mirror them for the lower half.
Symmetry and straight edges
The diameter is even, so there is no centre block. The middle is a two by two square, and the circle has two middle rows and two middle columns. Mark the two centre lines before you start. The longest straight run is 6 blocks. Long flat runs make a circle look squarer, and short ones make it look rounder, which is why sizes like 15 and 20 look a little different from 16 even though they are close.
Block counts for walls of different heights
A round tower or wall repeats the thin outline layer after layer. These are the totals for a 16 block wide wall.
| Height | Thin wall | Stacks |
|---|---|---|
| 1 layer | 44 | 44 |
| 3 layers | 132 | 2 stacks + 4 |
| 5 layers | 220 | 3 stacks + 28 |
| 10 layers | 440 | 6 stacks + 56 |
| 20 layers | 880 | 13 stacks + 48 |
Building it without mistakes
Place four marker blocks, one at each side, then fill in the runs between them. The two middle blocks on each side are the ones that line up with the centre lines. Build one quarter, check it against the guide, and copy it to the other three by mirroring. Count your first row before you build the rest, a single wrong skip shifts the whole curve.
For a roof or a floor, switch the tool to Filled. For a wall with no diagonal gaps, which matters for moats, pens and sealed rooms, switch to Thick and expect 16 extra blocks per layer.
Other circle sizes
For ovals or any size not listed, use the circle generator. To turn a circle into a ball, try the sphere generator, or the stack calculator to turn a block total into chests.
Block counts on this page are computed by the generator and are the same in every version of the game. BlockShapes is not affiliated with Mojang or Microsoft.
Frequently asked questions
How many blocks is a 16 block circle?
A thin outline needs 44 blocks. A thick outline without diagonal gaps needs 60. A filled disc needs 208. For a thin outline that is 44.
Is the 16 block circle the same in Java and Bedrock?
Yes. Blocks are square in both editions, so the same pattern gives the same circle. Only the commands and tools you might use to place it differ.
How wide is the flat edge of a 16 block circle?
The longest straight run of blocks is 6. It appears at the top, bottom, left and right of the circle.
How many blocks for a wall 16 blocks wide and 10 high?
A thin wall of ten layers needs 440 blocks, which is 6 stacks + 56. A thick wall would be 600 blocks.
Should I pick 16 or a different size?
Going down to 15 saves 4 blocks per thin layer. Going up to 20 adds 12 blocks per thin layer. Pick the size that fits the space you have, then check the count.